Éclairage de secours antidéflagrant à LED

LED explosion-proof emergency lighting Scope of application
◆Suitable for zone 1 and zone 2 of explosive gas environment;
◆Suitable for combustible dust environment 21, 22;
◆Suitable for IIA, IB, I C class explosive gas environment;
◆Suitable for environments with temperature levels T1~T6; .
◆ Largement utilisé dans l’exploration pétrolière, le raffinage du pétrole, l’industrie chimique, le stockage, l’énergie électrique, l’industrie militaire, etc.
Éclairage normal et éclairage de secours pour les environnements dangereux et les plates-formes pétrolières offshore.
LED explosion-proof emergency lighting Normal working conditions
◆The altitude of the installation site shall not exceed 2000m;
◆The ambient temperature of the weekly group is -40 +40C, and the average temperature within 24h does not exceed +35C;
◆The relative humidity of the air in Zhouyuan is not more than 95% (+25"C)
◆In places without severe vibration, shock and shaking: .
◆Suitable for Zone 1, Zone 2, IA. IB, IC and T1-T6 group explosive gas environment:
LED explosion-proof emergency lighting Product structure performance
◆Aluminum alloy die-casting shell, surface high-voltage electrostatic spray:
◆The lamp adopts threaded flameproof and plane flameproof explosion-proof structure, which has excellent explosion-proof performance and meets IC-level explosion-proof requirements;
◆The transparent parts are made of tempered glass, which has the properties of high temperature resistance, overheating resistance, and heat-resistant drastic changes;
◆A good sealing structure is set between each joint surface of the lamp, and the sealing ring is made of silicone rubber material, which is resistant to high temperature and aging, and the protection level of the shell reaches IP66;
◆After shot blasting and surface chemical treatment on the surface of the lamp shell, the surface is sprayed with high voltage electrostatic, which has strong corrosion resistance, and the anti-corrosion grade reaches WF2;
◆The light source adopts international famous brand, with high luminous efficiency and long service life;
◆Special constant current power supply, high efficiency, low power consumption, and has the functions of open circuit, short circuit and overheating protection, to ensure the reliable operation of the light source, and give full play to the characteristics of high light efficiency, energy saving and long life;
The lamp adopts an integrated design, and realizes the design structure of the light source cavity and the power supply cavity. The light source cavity and the power supply cavity are completely isolated, and a special ventilation and heat dissipation structure is adopted in the middle to ensure
The heat generated by the light source and power supply can be quickly dissipated;
◆Some lamp types can be equipped with one-body emergency. When the power supply is cut off, the lamp will automatically switch to the emergency lighting state;
LED explosion-proof emergency lighting Main technical parameters

modèle	BZD158-110
	I(Type)	II(Type)	III(Type)
Norme exécutive	GB3836 (équivalent aux normes IEC60079, série EN)/GB12476 (équivalent aux normes IEC61241, série EN)
Marque antidéflagrante	Exd IICT6Gb/Ex tD A21
tension nominale.	AC220V/50Hz
puissance nominale	50W-100W	120W-200W	220W- 300W
Flux lumineux LED	4500- 9500Im	11000-19000Im	20000- 28500Im
facteur de puissance	≥0,95
Efficacité énergétique	≥0,88
Indice de rendu des couleurs	≥80
Courant d’appel	Démarrage à froid/froid;30A(max)230VAC
Sécurité	UL8750, TUV EN61347-1, EN61347-2-13
Normes de compatibilité électromagnétique	EN61 000-3-2.TUV EN61347-1, EN61347-2-13
Classe de protection	IP65
Grade anticorrosion	WF2
Filetage d’entrée	G3/4 »
Spécifications des câbles	Moyen 7-Moyen 12mm
méthode d’installation.	Type de plafond (x), type de suspension de poteau (g), type de support (z), type de mur (b1, b2), type de bride (f), type de garde-corps (h)
Environnement de travail	Température: -40 ~ 45C Humidité: 10% ~ 90%
durée de vie	≥50000H
Poids du produit	5kg	7.8kg	9.5kg

LED explosion-proof emergency lighting Order Notice

1. When ordering, please select one by one according to the product model.
2. The lamp has been equipped with power supply and light source when it leaves the factory.
3. The lamps can be equipped with different installation methods.
4. The company supports OEM/ODM services, please contact the account manager for detailed requirements